Nutone AN70L InVent Exhaust Fan and Light
This exhaust fan 70 cfm, 2.0 sones, energy star, incandescent 100 watt bulb not included. This replaced the 769rl, with this new fixture. This is ideal for your small bathroom or powder room. This exhaust fan with cover up to 65 square feet and will clear all your smell and steam from your room. This exhaust fan is easy to retro fit as it has a 4” duct collar that goes into the can, making it so you do not have to go into your attic. This lighted exhaust fan has a no light. The rough in dim 9.25x10x 5 3/4. The finish grille size is 11.5x 12.25, great for covering up older fixtures that you have removed. For quiet and efficient operation, long life, and attractive appearance, lower or remove grille and vacuum interior of unit with the dusting brush attachment. The motor is permanently lubricated and never needs oiling. If the motor bearings are making excessive or unusual noises, replace the blower assembly. This new fan will make any bathroom more attractive.
80 CFM reduces humidity to quickly eliminate fogged mirrors and manage moisture in bathrooms up to 65square feet, so your vision will always be clear and your surroundings will always be comfortable
Retrofit installations can be done entirely from the room side no attic access required. This means a faster, easier installation, so you can move on to something else
With our TrueSeal™ Damper Technology, InVent fans reduce air leakage by up to 50%* compared to competitive models, resulting in better home performance via blower door tests and reducing cold and warm air backdrafts
EzDuct 4”Connector can be installed room-side with no attic access required, fan housing connection have never been easier
ENERGY STAR® Qualified
UL Listed for use over tubs and showers with a GFCI circuit; so you can capture the steam before it spreads throughout the room by locating your fan exactly where you need it the most.
100 watt incandescent bulb, not included