Home > Ironing Centers > IronAway Ironing Centers >

Ironaway ANE42 In Wall Ironing Board

Ironaway ANE-42 In Wall Ironing Board
Ironaway ANE-42 In Wall Ironing Board
Ironaway ANE42 In Wall Ironing Board - ANE42WDU
Ironaway ANE42 In Wall Ironing Board - ANE42WDU
Ironaway ANE42 In Wall Ironing Board - ANE42WDU
Ironaway ANE42 In Wall Ironing Board - ANE42WDU
Ironaway ANE42 In Wall Ironing Board - ANE42WDU
Ironaway ANE42 In Wall Ironing Board - ANE42WDU
Ironaway ANE42 In Wall Ironing Board - ANE42WDU
Item #: ANE42WDU
Retail: $606.70 Price: $455.03
You Save: $151.67 (25.0%)
Quantity:
There are no reviews yet.
Write a review
What side would you like the hinge?

Door Type


Accessory Options:

In Wall Ironing Board IronAWay ANE-42

Our metal ventilated board differentiates itself from the earlier wooden ironing boards. This Center has the Swival but no electrical. The traditional built-in wooden board only needed to be hard for the dry irons of the day. Today�s advanced steam irons are designed to project bursts of steam to penetrate deep into the fabric. This allows for removing wrinkles with less effort. Yet, using them on a wooden ironing board caused a build-up of condensation on the board and hot spots when ironing. Our metal ventilated board allows steam to pass through the fabric keeping the surface dryer and providing a more even-heated ironing surface.

Are you looking for the optimal freedom in board usage? A swivel board allows for a 90 degree left/right turn of the board creating the flexibility that may be necessary in confined areas.

Do you like ironing off the back of the board rather than the nose of the board? The swivel mechanism allows for the board to extend out of the cabinet and then turn left or right; this allows the back end of the board to be accessible and you now have the choice to iron off it.

Not only is it convenient to store your iron inside the unit, but the location keeps the iron out of children�s reach.

There�s no reason to let your iron cool down, the insulated heat shield allows for immediate shelving.

The hot iron storage area has been designed to accept the majority of steam/dry irons available at retail, including many premium models.

The garment bar is helpful when you have more than just a few garments to iron.

The garment bar can hold multiple clothes hangers, making it more convenient to perform continuous ironing.

This feature is standard on all other models except the IAW-42.

STANDARD FEATURES

  • 42" Ventilated Board
  • Adjustable Swivel
  • Hot Iron Storage
  • Storage Shelf
  • Full Length Piano Hinge
  • Ironing Board Cover & Pad
  • Garment Bar
  • Unfinished Flush Wood Door (Maple Veneer)
  • Fully assembled and ready to install
  • Finish Dimensions15� x 52� x 7 ��
  • Rough-In Opening Size14 3/8� x 51 1/4� x 3 7/8�

Options:

  • Additional Door Options (Maple,White,Oak, Pine, Mirror
  • Appliance Door Overlay Options (Metal)
  • Door Hardware
  • Hot Iron Rest
  • Maytag Steam 800M /Dry Iron
  • Sleeve Board
  • Surface Mount Kit (Surface Mounting unfinished)
  • Rough-In Kit (Paper Template)

Models come standard with a flat maple veneer door. All wood doors come unfinished and can be stained or painted to match your decor. White doors do not require finishing. Mirror is full length, 1/4" plated glass with polished edge. Mirrored door is shipped separate for added protection. No door option is available to match your cabinetry. Keep in mind the door hardware is not included when ordering a "No Door." This consists of the Piano Hinge, Roller Catch Assembly, and Garment Bar. If you would like a "Door Hardware Kit," add them by choosing this option within the Optional Features section.

All models come standard with a wood door. Metal Door Overlays come painted and ready to install over the standard wood door. Metal Door Overlay attaches to front of wood door with permanent mounting tape.

Door Hardware consists of a Garment Bar, Roller Catch, and the Piano Hinge. When placing an order for an ironing center, if you choose the no door option, all door Hardware attached to door will not be included and you will receive a price reduction. If you want the door hardware included, but not attached; please select this option from the Optional Features Section. The door hardware will be added back into the overall total.

The Maytag Smart Fill - M800 is a trendy iron and steamer in one. The innovative removable water tank allows you to fill it while the iron is heating. Heating takes less than one minute with the new speed heat technology. The iron�s innovative controls for water spray and steam surge provides dramatic results. The stainless steel sole plate enables the smoothest glide and the 360 degree tangle free cord offers the ultimate freedom of motion. This iron�s quality, design, and function will compliment your IRON-A-WAY ironing center.

The sleeveboard is placed on top of the main board and used when you want to iron sleeves or smaller garments that won't fit over the nose of your regular ironing board. When in use, the sleeveboard rests on top of the main ironing board, nothing holds it in place. Please note, when not in use the sleeveboard is not stored inside the unit, it must be stored in another location than inside the unit itself.

The kit is necessary if planning to surface mount rather than installing in between studs
60� Surface Mount Kit used for Models AE-46, E-46, NE-46 and UD-42
52� Surface Mount Kit used for Models AE-42, E-42, and NE-42
No Surface Mount Kit necessary for Model IAW-42
Surface Mount Kit finishes out back sides of unit for flush finish
Wood pieces can be stained or painted to match cabinet
Unit will protrude approximate 7� to 8� rather than 3� � 4� depending on which model purchased

In Wall Ironing Board IronAWay ANE-42

Overall height: 52�
Overall width: 15�
Overall depth including door: 7 3/4�
Dimension from wall to outer
edge of door (when recessed): 3 7/8�
Penetration into opening: 3 7/8�
Rough opening height: 51 1/4�
Rough opening width: 14 3/8�
Wall opening depth: 3 7/8�

Unit may be surface mounted (unit extends approximately 7 3/4� into room) or recessed (unit extends approximately 3 7/8� into room) into any wall with standard 16� center studs.
� See table bottom right to determine desired ironing board height above the floor.
� Unit can be provided with a left hinged door upon request. Right hinge is standard.
� Comes standard with wood veneer door.
� Electrical requirements for E-42: 115/120v, 15 amp. Pigtails are provided in bottom of wire raceway for hookup to supply line. Make entrance into knockout provided in top of wire way through left-hand vent hole.
� Electrical requirements for NE-42: Does not require electricity, it is non-electric.
� Recommended to attach 2� x 4� cleats to studs, level with the bottom of opening (for support when recessing unit.)
� Door opens approximately 180�. Allow at least 16� to the side of the unit for door to swing open (door hinges on full length piano hinge.)
� Options include: Surface mount trim (necessary for surface mounting), oak, maple, pine, or white raised panel door, flat white door, glass mirrored door, or no door, sleeve board, swivel, rough-in kit, and iron.

 
 
Home Products Inc.
Ph: 866.368.8663
Hrs: MON-THU 8am to 5pm
        FRI 8am to 4:30pm PST
ALL CATEGORIES:
 
 
Broan® and NuTone® are trademarks of Broan-NuTone, LLC,
its subsidiaries and affiliates.
All other brands are trademarks of their respective owners.

© 2011 Q2U, LLC a limited liability company. All Rights Reserved.